Remodel Your Garage !

home improvement loans california refinance mortgage loan


Sealing a garage floor

The floor of your garage is exposed to intense corrosion and deterioration due to road salt, oils and other auto fluids. Sealing your garage floor reduces dust and makes cleaning and sweeping easier. A clear acrylic concrete sealer protects the concrete from damage and stains. Also the same sealers can be used on concrete walks and driveways or as a primer under acrylic or polyurethane floor paints. You should take care when and where you apply a sealer because they cannot be applied over paint or other coatings.

In order to do the sealing yourself you need several materials and tools: protective clothing, neoprene rubber gloves, goggles, a stiff brush and a bucket, a paintbrush, a cartridge-style respirator with organic-vapor and small-particle filters, paint roller with extension handle and tray, medium nap roller cover, a concrete degreaser and of course some concrete sealer. Usually ½ gallon of sealer is used for approximately 100 square feet.

Before sealing you have to clean the floor because it has to be free of dirt, grease and oil. To do this you should use a stiff scrub brush to apply the cleaner and concrete degreaser according to the instructions. Allow the solution to lay on the floor for 15 to 20 minutes more for stubborn stains after scrubbing. After his you should rinse thoroughly with clear water. You may need several applications. Many concrete sealers contain hazardous chemicals that may be harmful to skin and eyes and the vapors are not safe to breathe but the vast majority are acrylic. The best way to avoid damages to your skin, eyes and lungs is to wear the protective equipment made of neoprene rubber gloves, goggles and a respirator with both organic-vapor and solid-particle filter cartridges. During the process of sealing the floor you should continuously ventilate the garage by opening all doors and windows and also using a fan would be a great idea.

After cleaning and drying the concrete, the sealer has to be applied. The sealer should be tested in an inconspicuous area before applying. Some uneven density in the concrete may result in light/dark appearance that may be objectionable. By using the medium-nap paint roller with extension handle is the easiest way to apply the sealer. Start in a rear corner continuing to work your way out of the garage. Before doing anything else you should allow the sealer to dry as indicated on the sealer bottle, usually for a few hours. For a driveway the procedure is essentially the same but it would be quicker to use a garden sprayer to apply the sealer to a large driveway. You should act with caution not to over spray on other material due to the high risk of staining.

Often being the largest opening on most homes, the garage door is usually the most vulnerable to failure under high wind pressure such as hurricanes, tornadoes and storms in general. The pressure of the wind can destroy the garage doors during a storm that allows water and wind to enter the house. This can cause significant damage to furniture, electronic equipment, the contents in general as well as the house’s structure. The garage door is often overlooked when strengthening the structure against high winds.

Massive building failures and strong winds have convinced storm-prone communities that residents must be prepared to employ active or passive reinforcement systems for their garage doors. An active system is that specific type of reinforcement that must be installed before a high-wind event while passive systems are built into the product and don’t need any activation from the owner. For the home owner in hurricane-prone areas there are only two real options: either a new garage door with a built in passive reinforcement system or a garage door reinforcement kit.

The option of totally replacing the garage door is usually an expensive procedure so a garage door reinforcement kit would be a good choice if your budget for remodeling your garage is low. Although is rather expensive, a new garage door offers a more secure and safe option in front of a high wind.

If you’d rather choose the cheapest option, that is to reinforce your garage door you can protect your home in one of the following ways: first of all install pressure or impact resistant devices, such as shutters, panels, accordion fold shutters on the garage doors or install pressure/impact resistant garage doors that do not require shutters. If your existing door is impact resistant but it is not wind pressure rated, install an approved garage door bracing system to increase the wind pressure resistance. A pressure/impact resistant rating ensures that the device meets the wind pressure and debris impact requirements of the Southern Building Code Congress International standards or the July 1988 wind pressure and debris impact requirements of the American Society of Civil Engineers adopted in September 1994.

When adding a garage door bracing first ensure that there is enough and relevant documentation that the product has been tested at a certified testing laboratory. The product should be designed to withstand both positive and negative wind pressure. You should contact a local garage doorsupplier of approved garage door bracing systems to assistyou in the selection of the necessary system for your needs.


Add to Onlywire


Related Entries:


Ditech Mortgage Company - Home Loans, Refinancing, and Equity

Offers first mortgages, fixed rate second mortgages, variable equity lines of credit, and no closing cost option equity seconds.

Read full post here



Home Improvement Discount Offers

© 2008 V Net | Back To Main Page